 |
Radio Frequency Induction
Heating Power Supplies |
|
| |
| Features/Benefits: |
 |
Application flexibility with a tuning range of 50-200 kHz. |
|
Continuous or intermittent duty |
|
100% solid state design |
|
Ideal replacement for less efficient oscillator tube power supplies. |
|
High, 0.95 input power factor under all operating conditions. |
|
±1% output regulation accuracy with ±10% line variance under all operating conditions. |
|
Single control board for reliable operation and simplified maintenance. |
|
Analog display of voltage, frequency, current and output power. |
|
Built-in digital heat timer. |
|
Optional RS-232/485 interface for automatic operation under computer control. |
|
Built-in load matching capacitors and variable ratio isolation transformer. |
|
|
 |
|
| |
|
RF Power Supplies For General Purpose Induction Heating |
|
| |
STATIPOWER® SP11 is a self-contained, stand-alone solid state transistorized power supply for heating a wide variety of parts. Application capabilities include hardening, tempering, brazing, soldering, melting, bonding and shrink fitting. A broad range of single-turn and other low impedance heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer. |
| |
|
Compact Design For Stand Alone Operation |
|
| |
STATIPOWER® SP11 power supplies are up to 80% smaller and up to 2,000lbs. lighter than conventional RF power supplies. This efficient use of space is achieved without sacrificing performance. Output power regulation is ±1% with up to ±10% line variance; the input power factor is 0.95, regardless of loading; and energy conversion efficiency exceeds 85% (a tube style RF oscillator is typically 50% efficient to the load). |
| |
|
Manual or Computer Controlled Operation |
|
| |
All controls necessary for stand-alone operation are built into STATIPOWER® SP11 power supplies. This includes a digital heat cycle timer, analog meters for voltage, frequency, current and power, and LED operating and diagnostic indicators. For automatic control and/or record keeping, an optional RS-232/485 interface is available. The only installation requirements are power and water. |
| |
| SPECIFICATIONS: |
| Output Power at 50-200 kHz |
Input kVA (max.) |
Water Req. for 25 psi Pressure Drop |
Dimensions WxDxH in. (mm) |
Shipping Weight Pounds (kg) |
| Floor model 25 kW |
32 kVA |
6 gpm(20 lpm) |
40x40x72 (1016x1016x1800) |
500 (295) |
| Floor model 45 kW |
58 kVA |
10 gpm(38 lpm) |
40x40x72 (1016x1016x1800) |
770 (349) |
| Floor model 90 kW |
120 kVA |
18 gpm(70 lpm) |
52x40x72 (1300x100x1800) |
980 (445) |
|
| |
| COMMON FEATURES: |
| Energy ConversionEfficiency |
85% minimum |
| Input Power Factor |
0.95 |
| Output Regulation |
Voltage, power or current |
| Regulation Accuracy |
±1% with ±10% line variance |
| Water Requirements |
95° F (max.) (35° C) |
| Power Requirements |
415 V, 3 Phase, 50 Hz |
| Operator Controls |
Panel-mounted analog meters for voltage, frequency, current and output power. LED operation and diagnostic indicators. Built-in digital heat cycle timer. Power, voltage or current control. Manual/timed selector switch. Local/remote control selector switch. Ten turn output control potentiometer. On-Off push buttons. Remote 0-10 volt or 4-20 m. |
| Safety Features |
Fast-acting, semiconductor-type fuses. No high voltages. |
| Optional features |
RS-232/485 interface. |
| *Specifications subject to change without notice |
|
| |
| |
|
|
 |
|
 |
| Brazed parts |
|
Tempered parts |
| |
|
|
|
| |
