Questinnaries for Froging of Inductotherm(india) Pvt. Ltd.
Previous

Questionnaire for Heating Systems ( General )

Dear Customer,

Kindly fill in this questionnaire as it will enable us to offer you our most suitable equipment to meet with your requirements. After you are finished with filling this form, click on the "SEND" button at the bottom of the screen to send it to us.

Note :

You can use "TAB" key on your keypad to move from one field to another field You can use "CLEAR RESET" button to erase your form completely and start on a new fresh one.

Thank You.

 
1 . Your Name :
2 . Address



 :
3 . Phone Number
(Please include your city / country codes ) 		:
4 . E-mail Address :
5 . Name of contact person :
6 . His designation and department. :
7 . Degree of customer's interest i.e. "Serious" or "general interest" :


8 . Degree of Urgency of Enquiry ?. :


9 . Supply voltage andFrequency. : VHz
10 . Have samples and/or drawings of components been despatch to Inductoheat for
processing ? (quote drawing nos.)		:


11 .
  • Material and parts to be joined`
    		• :
    12 .
  • Dimensions and shape of parts ( if possible forward drawings or samples )
    		• :
    13 .
  • Joining Material
    		•  :
    14 .
  • Form of Joining ( paint, power, rings, rod )
    		• :
    15 .
  • Maximum cost of brazing material permissible ( i.e. would silver solder be too expensive ?. )
    		•  :
    16 .
  • Production rate in components per hour.
    		• :
    17 .
  • Minimum and maximum service temperature of components
    		• :

    18 .
  • Special flux
    		• :

    19 .
  • Protective atmosphere ?.
    		• : Degree of Vacuum?.
    20 .
  • Quote for handling equipment ?.
    		• :
    21 .
  • Is hand feeding permissible ?.
    		• :

    22 .
  • Remarks.



    		• :
     
    Miscellaneous Induction Application
     
    Technical Data
    23 . Material to be heated
    		:
    24 . Dimensions of material or components
    		:

    25 . Is automatic temperature required
    		:

    26 . Production Rate
    		:

    27 . Minimum and Maximum heating times
    		:

    28 . Maximum Temperature required
    		:

    29 . Is Vacuum or Protective atmosphere required, degree of vacuum, what gas ?.
    		:

    30 . Is induction equipment to be used for other original purpose application
    		:

    31 . Material heated for directly or via susceptor
    		:

    32 . Requirements for susceptor material, i.e. Graphite Tungsten, Tanalum, Molybdenum
    		:

    33 . Mediation shields permissible
    		:

    34 . Quote for handling equipment ?.
    		:

    35 . Electrical characteristics of material  ( Resistivity, Temperature co-efficient of resistivity )
    		:

    36 . Other
    		:



     



    Email

    Last update on - 7th March, 2007