Inductotherm's VIP Power-Trak R systems are based on the voltage fed series inverter principle, which is most suitable for metal melting applications.
VIP Power-Trak gets its name from its inherent feature of tracking power and keeping it at the full power level from start to finish.
Over 9000 VIP Power Trak are being used all over the world in a wide range of metal melting applications ranging from irons and steels to copper, aluminium alloys, precious metals and special requirements with furnaces used from 1.5 kg to over 50 tons.
VIP Power-Trak R (Primary Isolated type) units in the range of 250 kW to 550 kW offer the unmatched melt rates in the industry with superior safety.
Inductotherm power supplies are most compatible for use with DG sets.
Full Power from start to finish means melting more metal in less time with less power and more profit
From zero up to full power VIP gives "Highest Power Factor" of 0.95 and above
Maximum kW delivered for a given KVA
Guaranteed fastest melt rates
Single control board that replaces elaborate multiple control boards, gives increased reliability and ease of maintenance
Diagnostic problem solving indicators also serve to alert operator to system problems
Backup safety system to maximise up time & minimise costly maintenance. This system include the ACI featuring soft start preventing surge currents, Over Voltage Protection module bypasses the surges on supply line which may cause system to shut down.
Zero maintenance air cooled bus bars resulting in less power requirement for water system and more efficiency
Mini Power Trak
Designed for industry's smaller, but no less demanding operations
Available from 15kW to 30 kW output at a frequency of 9600 Hz
